Lines and Angles | A

Question 3

2.7 Making Rotating Arms

Make several 'rotating arms' with different angles between the arms. Arrange the angles you have made from smallest to largest by comparing and using superimposition.

Question diagram 1
Check your answer with HomiSolve it yourself, then let Homi check your steps and spot mistakes.
Solution
Understand the Question
  • A rotating arm is a simple model made of two straight strips joined at a vertex to visualize and model different angles.
  • The size of an angle depends entirely on the amount of opening or rotation between the two arms, not on the length of the arms.
  • Superimposition is a method of comparison where one angle is placed directly over another so that their vertices and one arm coincide, making it easy to see which angle has a smaller or larger opening.

Step 1 · Make the Rotating Arms

Diagram 1

  • Take a bent wire to serve as the vertex and pivot.
  • Slide two straight strips (arms) onto the bent wire so they can open and close freely, forming an angle.

Step 2 · Create Different Angles

  • Adjust the bend of the wire or the opening between the strips to create several rotating arms with different degrees of spread.
  • A narrower opening corresponds to a smaller angle, while a wider opening corresponds to a larger angle.

Step 3 · Compare and Arrange by Superimposition

  • Take any two rotating arms and place one directly on top of the other such that their vertices and one arm perfectly coincide.
  • Observe the position of the second arm:
    • The arm that lies inside represents the smaller angle.
    • The arm that lies outside represents the larger angle.
  • Repeat this superimposition for all pairs to arrange the angles in order from smallest to largest.
Answer

By superimposing the rotating arms with their vertices and one arm matching, the arm with the narrower opening represents the smaller angle. Comparing all arms this way arranges them from smallest to largest.

Common Mistakes
  • Arm Length vs. Angle Size: Confusing the physical length of the strips with the size of the angle. An angle depends solely on the opening/spread between the arms, not how long the strips are.
  • Improper Alignment during Superimposition: Failing to align both the vertex and one arm exactly on top of each other, leading to incorrect comparisons.

More questions in A

Q1

Fold a piece of paper and unfold it. Do you see a crease?

Q2

Mark any two points AA and BB on a sheet of paper. Try to connect AA to BB by various routes (Fig. 2.1). What is the shortest route from AA to BB?

Q3

2.7 Making Rotating Arms

Make several 'rotating arms' with different angles between the arms. Arrange the angles you have made from smallest to largest by comparing and using superimposition.

Q4

Now, shuffle and mix up all the rotating arms. Can you identify which of the rotating arms will pass through the slit?

Q5

Let's Explore

We can try to solve this problem using a piece of paper. Recall that when a fold is made, it creates a crease which is straight.

Take a rectangular piece of paper and on one of its sides, mark the straight angle AOB. By folding, try to get a line (crease) passing through O that divides AOB\angle AOB into two equal angles.

How can it be done?

Fold the paper such that OB overlaps with OA. Observe the crease and the two angles formed.

Q6

Fold the semi-circular sheet in half as shown in Fig. 2.15 to form a quarter circle.

Q7

Fold the sheet again as shown in Figs. 2.16 and 2.17:

When folded, this is 18\dfrac{1}{8} of the circle, or 18\dfrac{1}{8} of a turn, or 18\dfrac{1}{8} of 360360^\circ, or 14\dfrac{1}{4} of 180180^\circ or 12\dfrac{1}{2} of 9090^\circ = ________.

The new creases formed give us measures of 4545^\circ and 18045=135180^\circ - 45^\circ = 135^\circ as shown. Write 4545^\circ and 135135^\circ at the correct places on the new creases along the edge of the semicircle.

Q8

Continuing with another half fold as shown in Fig. 2.18, we get an angle of measure ________

Q9

Unfold and mark the creases as OB\text{OB}, OC\text{OC}, \dots, etc., as shown in Fig. 2.19 and Fig. 2.20.

Q10

Make the paper craft as per the given instructions. Then, unfold and open the paper fully. Draw lines on the creases made and measure the angles formed.

Q11

Mind the Mistake, Mend the Mistake!

A student used a protractor to measure the angles as shown below. In each figure, identify the incorrect usage(s) of the protractor and discuss how the reading could have been made and think how it can be corrected.

  • U=35\angle U = 35^\circ
  • V=80\angle V = 80^\circ
  • W=70\angle W = 70^\circ
  • X=150\angle X = 150^\circ
  • Y=120\angle Y = 120^\circ
  • Z=85\angle Z = 85^\circ
Q12

Let's Play a Game #1

This is an angle guessing game! Play this game with your classmates by making two teams, Team 1 and Team 2. Here are the instructions and rules for the game:

  • Team 1 secretly choose an angle measure, for example, 4949^\circ and makes an angle with that measure using a protractor without Team 2 being able to see it.
  • Team 2 now gets to look at the angle. They have to quickly discuss and guess the number of degrees in the angle (without using a protractor!).
  • Team 1 now demonstrates the true measure of the angle with a protractor.
  • Team 2 scores the number of points that is the absolute difference in degrees between their guess and the correct measure. For example, if Team 2 guesses 3939^\circ, then they score 1010 points (493949^\circ - 39^\circ).
  • Each team gets five turns. The winner is the team with the lowest score!
Q13

Let's Play a Game #2

We now change the rules of the game a bit. Play this game with your classmates by again making two teams, Team 1 and Team 2. Here are the instructions and rules:

  • Team 1 announces to all, an angle measure, e.g., 3434^\circ.
  • A player from Team 2 must draw that angle on the board without using a protractor. Other members of Team 2 can help the player by speaking words like ‘Make it bigger!’ or ‘Make it smaller!’.
  • A player from Team 1 measures the angle with a protractor for all to see.
  • Team 2 scores the number of points that is the absolute difference in degrees between Team 2’s angle size and the intended angle size. For example, if player’s angle from Team 2 is measured to be 2525^\circ, then Team 2 scores 9 points (342534^\circ - 25^\circ).
  • Each team gets five turns. The winner is again the team with the lowest score.
← Back to Lines and Angles